[BUILD THREAD] Scorpion 4x4 build continues....

some spare midnight oil to burn.... so continued the build...

was choosing whether to use the spare AX10 part to transfer over to the Integy tuber chassis.... or to use the rc4wd T-Rex 60 axles....

Enlarge this image

i decided to go for the easier method.. transfer the ax10 parts over...
so first thing to do was to take the transmission assembly off from the ax10....

Enlarge this image

the 55t motor will be replaced with a 550 sized silver can....

Enlarge this image

took apart the transmission and filled it up with marine grease....
then assembled it back together with the spur gear cover....

Enlarge this image

Enlarge this image

broke the 1.5 hex driver while removing a grub screw on the drive shaft...

Enlarge this image

made some lower links using threaded rod and M4 rod ends as the links on the AX10 are too long....
lower links are now 9.5cm "eye to eye".... 1cm shorter than the AX10 lower links...

replaced the shocks to 85mm shocks as well....

Enlarge this image